Service guide

Cabinet Refacing

New doors, drawer fronts and veneer over existing boxes: how it works and when it makes sense.

Published: April 7, 2026

cabinet boxes being fitted with new doors

How Refacing Works

The existing doors and drawer fronts are removed. Exposed box surfaces and face frames are covered with matching wood veneer or laminate, and new doors, drawer fronts and hardware are installed. Hinges are usually replaced, and drawer boxes and slides can be upgraded at the same time.

When It Makes Sense

Refacing suits kitchens with a layout you are happy with and boxes that are structurally sound. It does not fix a poor layout, damaged boxes or worn-out drawers unless those are replaced too. Countertops can usually stay in place, which is a large part of the savings.

Refacing, Painting or Replacing

Painting is the least expensive and keeps the existing doors. Refacing costs more and gives you new doors in any style. Replacement costs the most and is the only option that changes the layout.

Refacing changes visible surfaces while keeping the existing boxes. If the layout must change or the boxes are failing, replacement may be the better fit; custom cabinets are one option when standard sizes will not work.

Find Cabinet Companies Near You

Each company in our city rankings lists the services it offers. Browse all states and cities, or start with Huntsville, Nashville, Atlanta or Tampa.

Recommended Guides

Service guideApril 23, 2026

Cabinet Painting

Professional cabinet painting: preparation, finishes and realistic expectations. Kitchen cabinets carry years of grease and handling. A lasting paint job starts with degreasing, sanding and a bonding primer. Doors and drawer fronts are normally removed and sprayed off site or in a contained area, while the frames are finished in place. Cabinet finishes need to be harder than wall paint. Painters use products made for cabinetry and trim, often sprayed for a smooth surface. Ask which product will be used and how long it needs to cure before normal use.

Service guideMarch 19, 2026

Cabinet Replacement

When to tear out and start over, and what a full replacement involves. Replace cabinets when the layout no longer works, when boxes are water-damaged, sagging or coming apart, or when the existing cabinets were poorly made to begin with. If the boxes are sound and you like the layout, refacing or painting may do the job for less. Removing cabinets usually means removing countertops, and often the backsplash. Plumbing and appliances are disconnected and reconnected. If the new layout moves the sink or range, plumbing, gas and electrical work are added. Flooring may need patching where the old cabinet footprint was different.

Shaker, raised-panel and slab sample doors

Service guideMay 28, 2026

Cabinet Doors

Door styles, overlay types, and replacing doors without replacing cabinets. Shaker doors have a flat center panel in a square frame. Raised-panel doors have a profiled center panel and read as traditional. Slab doors are a single flat panel and read as modern. Glass-front doors are used as accents. Full-overlay doors cover nearly all of the cabinet face. Partial-overlay doors leave part of the face frame visible. Inset doors sit inside the frame, flush with it; they need precise fitting and cost more.

Service guideMay 12, 2026

Cabinet Hardware

Knobs, pulls, hinges and drawer slides, and why the parts you cannot see matter most. Decorative hardware is the easiest part of a kitchen to change. Knobs need one hole; pulls need two at a fixed spacing, so replacements have to match the existing holes unless the doors are being refinished. Choose a size in proportion to the door or drawer. Concealed, soft-close hinges are standard on most new cabinets. Drawer slides matter more: full-extension, soft-close slides let a drawer open completely and carry real weight. Ask which brands a cabinet company uses.

Types and materialsOctober 6, 2026

Cabinet Finishes

Painted, stained and natural finishes, and how each one wears. Painted cabinets give a solid, even color. Paint shows chips and hairline cracks at door joints more than stain does, so ask for a touch-up kit and for the name of the color. Stain adds color while leaving the grain visible; a clear coat alone shows the natural wood. Both hide wear well. Species matters: maple is smooth and even, oak has strong grain, cherry darkens with age, and walnut is naturally dark.

Types and materialsSeptember 15, 2026

Cabinet Styles

Shaker, raised-panel and slab doors, and the difference between traditional, transitional and modern. The door does most of the work. A Shaker door has a flat center panel in a square frame and suits almost any house. Raised-panel doors have a profiled center panel. Slab doors are a single flat panel with no frame. Traditional kitchens use raised-panel or detailed doors, crown molding and furniture-style details. Modern kitchens use slab doors, minimal hardware and clean lines. Transitional kitchens sit between the two, typically with a Shaker door and simple molding.

Service guideApril 23, 2026